|
제품 상세 정보:
접촉
지금 챗팅하세요
|
| 애플리케이션의 범위: | 산업 | 종류: | 전기 고정 용광로 |
|---|---|---|---|
| 사용: | 세라믹 시너링 | 효과적인 챔버 치수: | 400*400*500mm (W*H*D) |
| 환경: | 질소/수소 | 열전대: | 비는 타이핑합니다 |
| 평가된 임시: | 1600ºC | 최대 임시: | 1700ºC |
| 사양: | 1570*2050*1830mm (W*H*D) | ||
| 강조하다: | high temperature box furnace with precise control,muffle furnace with temperature stability,atmosphere box furnace for high heat |
||
1. Applications:
Mainly used for High Temperature Co-fired Ceramic (HTCC) in high temperature nitrogen and hydrogen atmosphere co-firing process, and also can be used for other related products in high temperature atmosphere sintering process.
2. Mainly Specifics:
| 3. Delivery List | |||
| Item | Note | QTY | |
| Basic Compositions | Furnace | 1 PC | |
| Certificates of Inspection | Furnace and major purchased components | 1 Set | |
| Technical Documents | Furnace specifications, technical documents of major purchased components, etc | 1 Set | |
| Key Parts | Heating Elements | Molybdenum Coil | 1 Set |
| Thermocouple | Watlow, THERMOWAY, B Type | 1 PC | |
| Temperature Controller | CHINO | 1 Set | |
| Monitor | Proface 10" touch screen | 1 Set | |
| Vacuum Pump | VALUE, 100m³/h | 1 Set | |
| Oxygen Analyzer | CHANG'AI | 1 Set | |
| Mass Flowmeter | HORIBA | 2 Sets | |
| Flow Indicator | HORIBA | 2 Sets | |
| Dew Point Probe | VAISALA | 1 Set | |
| Spares | Heating Elements | Molybdenum Coil | 1 PC |
| 4. Optional Items | ||
| Item | Note | QTY |
| Humidifier | humidifying chambers: 2 (nitrogen, hydrogen) Power: 2.5kW Control Mode: PID Control |
1 Set |
| Hydrogen Alarm System | Detection Range: 0 - 5000ppm Resolution: 1ppm |
1 Set |
| Gas Treatment Equipment (Connect to Furnace Exhaust) |
Burning Temp.: 750 - 850ºC Max Power: 12kW Burning Method: Electric heating Control Mode: PID Control Max Process Capacity: 50Nm3/h |
1 Set |
| Chiller | Standard cooling capacity: 2451Kcal/h Power Supply: 220V, 50Hz(TBD) Power: 1.22kW Pipe Type: 1/2" Lift: 20m |
1 Set |
5. Facility Requirements
5.1 Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong
airflow disturbance.
5.2 Process air conditions: nitrogen, purity 99.999%, air source pressure 0.2 - 0.4Mpa, gas
consumption 3 - 6m3 /h; Hydrogen, purity 99.99%, gas source pressure not less than 0.1Mpa, gas consumption is 0.6 - 6m3 /h;
5.3 Power air source conditions: clean, dry, oil-free compressed air, pressure 0.4 - 0.8Mpa;
5.4 Water Inlet condition: 0.1 - 0.3Mpa, clean, no corrosion, supply flow 2 - 5L/min;
5.5 Ventilation system: non-contact access to the user pumping system, pumping capacity is greater
than 10m3 /h;
5.6 Ground requirements: level, no obvious vibration, bearing capacity > 500Kg/m2 .
5.7 Power conditions: capacity greater than 35kVA, 3 phases 5 lines, voltage 220/380V, frequency
50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green;
5.8 Installation site: 2500mm×3000mm×2500mm (W×H×D), installation area greater than 7m2.
담당자: zang
전화 번호: 18010872860
팩스: 86-0551-62576378
