Mainly used for binder burning out(BBO) process of electronic components, ceramic substrates.
2. Mainly Specifics:
| Rated Temp. |
350ºC |
| Max Temp. |
500ºC |
| Effective Dimensions |
600 × 600 × 600mm(W×H×D) |
| Heating Method |
Stainless Steel Heater |
| Process Atmosphere |
Nitrogen |
| Temperature Control Stability |
±1ºC, with PID parameter self-tuning function |
| Temperature Uniformity |
better than ±5ºC (insulation 1 hour at 400ºC test) |
| Thermocouple |
Type K |
| Temperature measurement points |
1 point
|
| Process Steps |
4 × 10 steps |
| Exhaust |
One exhaust port on top |
| Max Heating Power |
18kW |
| Insulation Power |
≤ 12kW |
| Surface Temperature Rise |
≤ 35ºC |
| 3. Delivery List |
|
Item |
Note |
QTY |
| Basic Compositions |
Dryer |
|
1 PC |
| Certificates of Inspection |
Dryer and major purchased components |
1 Set |
| Technical Documents |
Manual instructions, technical documents of major purchased components, etc |
1 Set |
| Key Parts |
Heating Elements |
Stainless Steel Heater |
1 Set |
| Thermocouple |
WATLOW/THERMOWAY, Type K |
1 PC |
| Temperature Controller |
|
1 Set |
| Monitor |
Touch screen |
1 Set |
| Spares |
SSR |
|
1 PC |
4. Facility Requirements
4.1 Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong
airflow disturbance.
4.2 Process air conditions: 99.999% purity nitrogen, pressure 0.2 - 0.4Mpa, gas consumption 10m3 /h.
4.3 Ventilation system: non-contact access to the user pumping system, pumping capacity is greater
than 15m3 /h;
4.4 Ground requirements: level, no obvious vibration, bearing capacity >300Kg/m2 .
4.5 Power conditions: capacity greater than 24kVA, 3 phases 5 lines, voltage 220/380V, frequency
50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green;
4.6 Installation site: 2000mm×3000mm×3000mm (W×H×D), installation area greater than 6m2.
Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.
1.What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
2.What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the most suitable products, along with highly customizable solutions to meet your specific requirements.
3.What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and sales, Chitherm possesses patented technologies and core resources to deliver superior solutions.
Mesajınız 20-3.000 karakter arasında olmalıdır!
