The entire oven is primarily composed of a frame, a furnace chamber, a furnace door, a hot air circulation system, a atmosphere system, a water cooling system, and a temperature control system.
II. Technical indicators and basic configuration
2.1. Temperature rating: 650 ° C;
2. Maximum temperature: 700 ° C;
2.3. Effective dimensions: 600 x 600 x 600 mm (W x H x D);
2.4. Material handling mode: stainless steel plating;
2.5. Furnace material: SUS310S;
2.6. Heating elements: stainless steel heaters;
2.7. Temperature control degree of stability: ± 1 °C;
2.8 platform temperature uniformity: ± 5C (300-600C platform, constant temperature 1h empty furnace test);
2.9. Thermocouple type: K degree;
2.10. Temperature control instrument: Japan imports smart temperature control instruments;
2.11. Number of stages of control: 4 × 16 stages;
2.12. Control temperature points: 1 point to control the studio temperature;
2.13. Detection points: 1 point to monitor the heating room temperature
2.14. Exhaust chimney: 1 which can be manually adjusted for the size of the exhaust vent;
2.15. Sintering atmosphere: air or nitrogen
2.16. Alarm protection: sound and light alarm protection such as ultra-temperature, deadlock, etc.;
2.17. Motor protection: overcurrent protection of the fan;
2.18. Surface temperature increase: ≤ 35 ° C;
2.19. Maximum heating rate: 5C / min;
2.20. Heating power: 24kW;
2.21. Empty furnace insulation power: ≤ 12kW;
2.22. Equipment colour: light grey;
2.23. Total weight of equipment: about 1000 kg;
2.24. External reference dimensions: 1300 mm × 1710mm × 1800mm (W × D × H, excluding chimneys).
| 3. Delivery List |
|
Item |
Note |
QTY |
| Basic Compositions |
Dryer |
|
1 PC |
| Certificates of Inspection |
Dryer and major purchased components |
1 Set |
| Technical Documents |
Manual instructions, technical documents of major purchased components, etc |
1 Set |
| Key Parts |
Heating Elements |
Stainless Steel Heater |
1 Set |
| Variable frequency drive |
|
1 Set |
| Air circulator |
Water cooling fan |
1 Set |
| Temperature Controller |
|
1 Set |
| Monitor |
Touch screen |
1 Set |
| Spares |
SSR |
|
1 PC |
| Stainless steel heater |
|
1 Set |
4. Facility Requirements4.1 Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strongairflow disturbance.4.2 Process air conditions: clean compressed air, pressure 0.2 - 0.4Mpa, gas consumption 3-7m3 /h.4.3 Ventilation system: non-contact access to the user pumping system, pumping capacity is greaterthan 10m3 /h;4.4 Ground requirements: level, no obvious vibration, bearing capacity >300Kg/m2 .4.5 Power conditions: capacity greater than 32kVA, 3 phases 5 lines, voltage 220/380V, frequency50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green;4.6 Installation site: 2000mm×3000mm×3000mm (W×H×D), installation area greater than 6m2.
Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.
1.What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
2.What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the most suitable products, along with highly customizable solutions to meet your specific requirements.
3.What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and sales, Chitherm possesses patented technologies and core resources to deliver superior solutions.
Mesajınız 20-3.000 karakter arasında olmalıdır!
