Industrial Hot Air Drying Oven with 800*800*800mm Chamber and 650°C Rated Temperature for Precise ±1℃ Temperature Control

•Model: HRF512-07N

•Purpose: Primarily used for heat treatment processes such as drying, curing, and binder removal of semiconductors, electronic components, or materials, especially suitable for processes requiring a nitrogen protective atmosphere.

Detailed Photos

II. Main Technical Parameters

Temperature Parameters:

•Normal operating temperature: Room temperature to 650°C;

•Maximum test temperature: 700°C (extreme tolerance, recommended ≤650°C for standard processes);

•Furnace temperature uniformity: ±5°C (tested at 650°C for 1 hour, empty furnace).

Furnace and Temperature Control:

•Furnace dimensions: 800×800×800mm (width × height × depth);

•Temperature zones: 1; Control points: 1 (single-point precision control).

Hardware Configuration:

•Heating elements: Stainless steel heaters;

•Air supply: 1 centrifugal fan wheel;

•Insulation: Full fiber material;

•Control system: Upper computer (MCGS touchscreen with user-friendly configuration software interface), lower computer (Yamatake C1A/C1M temperature controller + Siemens PLC), real-time temperature data collection and parameter transmission, high stability, supports continuous operation.

Power and Cooling:

•Maximum heating power: ≤36kW;

•Cooling method: Natural cooling with the furnace.

Key Requirements:

1. Nitrogen (inlet gas): High-purity nitrogen (purity ≥99.999%), pressure 0.2-0.4MPa, gas consumption ~10m³/h;

2. Water (if applicable): Clean and non-corrosive, temperature ≤23°C, pressure 0.2-0.4MPa, circulation rate ~2-6L/min;

3. Environment: Temperature 0-40°C, humidity <80%RH, no corrosive gases or strong airflow disturbances;

4. Ventilation: Must connect to user exhaust system (non-contact), exhaust capacity >15m³/h;

5. Floor: Level, vibration-free, load-bearing >300kg/m²;

6. Power supply: Three-phase five-wire 220/380V, 50Hz, capacity >50kVA, wire color standards (live wires: yellow/green/red, neutral: blue, ground: yellow-green);

7. Installation space: Dimensions 2000×3000×3000mm (width × depth × height), area >6m².

System Features: MCGS touchscreen + Yamatake temperature controller + Siemens PLC combination ensures stable control and intuitive operation, suitable for long-term continuous production.