|
|
Thông tin chi tiết sản phẩm:
Tiếp xúc
nói chuyện ngay.
|
| Phạm vi của các ứng dụng: | Công nghiệp | Kiểu: | Lò giữ điện |
|---|---|---|---|
| Cách sử dụng: | Sấy gốm | Nhiên liệu: | Điện |
| Bầu không khí: | Nitơ | Kích thước buồng hiệu quả: | 800*800*800mm (W*H*D) |
| Loại cặp nhiệt điện: | loại K | Gói vận chuyển: | Bao bì gỗ |
| Đặc điểm kỹ thuật: | 1500*1930*2000mm (W*H*D) | Thương hiệu: | Chitherm |
| Nguồn gốc: | Trung Quốc | Mã HS: | 8514101000 |
| Khả năng cung cấp: | 50 bộ/năm | Tùy chỉnh: | Có sẵn |
| Chứng nhận: | ISO | Đặt phong cách: | Thẳng đứng |
| Làm nổi bật: | 800*800*800mm Chamber Hot Air Drying Oven,650°C Rated Temperature Muffle Furnace,±1℃ Temperature Control Stability Industrial Drying Oven |
||
•Model: HRF512-07N
•Purpose: Primarily used for heat treatment processes such as drying, curing, and binder removal of semiconductors, electronic components, or materials, especially suitable for processes requiring a nitrogen protective atmosphere.
| Delivery List | |||
| Item | Note | QTY | |
| Basic Compositions | Dryer | 1 PC | |
| Certificates of Inspection | Dryer and major purchased components | 1 Set | |
|
Electric purification furnace |
For exhaust gas treatment |
||
| Technical Documents | Manual instructions, technical documents of major purchased components, etc | 1 Set | |
| Key Parts | Stainless Steel Heater | 1 Set | |
| Temperature Controller | 2 Set | ||
| Touch Screen | 1 Set | ||
| circulating fan | 1 Set | ||
| Spares | SSR | 1 PC | |
| Stainless Steel Heater | 1 Set | ||
| Seal gasket | 2 Set | ||
II. Main Technical Parameters
Temperature Parameters:
•Normal operating temperature: Room temperature to 650°C;
•Maximum test temperature: 700°C (extreme tolerance, recommended ≤650°C for standard processes);
•Furnace temperature uniformity: ±5°C (tested at 650°C for 1 hour, empty furnace).
Furnace and Temperature Control:
•Furnace dimensions: 800×800×800mm (width × height × depth);
•Temperature zones: 1; Control points: 1 (single-point precision control).
Hardware Configuration:
•Heating elements: Stainless steel heaters;
•Air supply: 1 centrifugal fan wheel;
•Insulation: Full fiber material;
•Control system: Upper computer (MCGS touchscreen with user-friendly configuration software interface), lower computer (Yamatake C1A/C1M temperature controller + Siemens PLC), real-time temperature data collection and parameter transmission, high stability, supports continuous operation.
Power and Cooling:
•Maximum heating power: ≤36kW;
•Cooling method: Natural cooling with the furnace.
Key Requirements:
Nitrogen (inlet gas): High-purity nitrogen (purity ≥99.999%), pressure 0.2-0.4MPa, gas consumption ~10m³/h;
Water (if applicable): Clean and non-corrosive, temperature ≤23°C, pressure 0.2-0.4MPa, circulation rate ~2-6L/min;
Environment: Temperature 0-40°C, humidity <80%RH, no corrosive gases or strong airflow disturbances;
Ventilation: Must connect to user exhaust system (non-contact), exhaust capacity >15m³/h;
Floor: Level, vibration-free, load-bearing >300kg/m²;
Power supply: Three-phase five-wire 220/380V, 50Hz, capacity >50kVA, wire color standards (live wires: yellow/green/red, neutral: blue, ground: yellow-green);
Installation space: Dimensions 2000×3000×3000mm (width × depth × height), area >6m².
System Features: MCGS touchscreen + Yamatake temperature controller + Siemens PLC combination ensures stable control and intuitive operation, suitable for long-term continuous production.
Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.
1.What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
2.What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the most suitable products, along with highly customizable solutions to meet your specific requirements.
3.What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and sales, Chitherm possesses patented technologies and core resources to deliver superior solutions.
Người liên hệ: zang
Tel: 18010872860
Fax: 86-0551-62576378
