Hbf80-17nh Type High-Temperature Atmosphere Box Furnace Temperature Control Stability ± 1 º C

Mainly used for High Temperature Co-fired Ceramic (HTCC) in high temperature nitrogen and hydrogen atmosphere co-firing process, and also can be used for other related products in high temperature atmosphere sintering process.

2. Mainly Specifics:

1. Rated Temp: 1600ºC
2. Max Temp: 1700ºC
3. Effective Dimensions: 400 × 400 × 500mm(W×H×D)
4. Heating Method: U-shaped molybdenum coil
5. Process Atmosphere: nitrogen/hydrogen (optional humidification function)
6. Temperature Control Stability: ±1ºC, with PID parameter self-tuning function
7. Temperature Uniformity: better than ±5ºC (1600ºC insulation 2 small time and space furnace test)
8. Thermocouple: B Type
9. Temperature control points: 1
10. Temperature measurement points: 1 point
11. Number of Temp. Profiles: 19×19 (the temperature controller can save 19 profiles, each profile can be set 19 steps)
12. Exhaust: One exhaust port with ignition device
13. Alarm System: over temperature, thermocouple failure and other abnormal conditions will activate sound and light alarm protection, over temperature heating power will turn off automatically
14. Max Heating Power: 25kW
15. Insulation Power: ≤15kW
16. Heating Rate: RT - 1000ºC ≤ 5ºC/min, 1000 - 1600ºC ≤ 2ºC/min
17. Surface Temperature Rise: < 35ºC
18. Weight: about 1600kg
19. Furnace Dimensions: about 1570×2050×1830mm (W×H×D);
20. Appearance Color: light gray

5. Facility Requirements
5.1 Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong
airflow disturbance.
5.2 Process air conditions: nitrogen, purity 99.999%, air source pressure 0.2 - 0.4Mpa, gas
consumption 3 - 6m³ /h; Hydrogen, purity 99.99%, gas source pressure not less than 0.1Mpa, gas consumption is 0.6 - 6m³ /h;
5.3 Power air source conditions: clean, dry, oil-free compressed air, pressure 0.4 - 0.8Mpa;
5.4 Water Inlet condition: 0.1 - 0.3Mpa, clean, no corrosion, supply flow 2 - 5L/min;
5.5 Ventilation system: non-contact access to the user pumping system, pumping capacity is greater
than 10m³ /h;
5.6 Ground requirements: level, no obvious vibration, bearing capacity > 500Kg/m² .
5.7 Power conditions: capacity greater than 35kVA, 3 phases 5 lines, voltage 220/380V, frequency
50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green;
5.8 Installation site: 2500mm×3000mm×2500mm (W×H×D), installation area greater than 7m2.

1.What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
2.What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the most suitable products, along with highly customizable solutions to meet your specific requirements.
3.What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and sales, Chitherm possesses patented technologies and core resources to deliver superior solutions.