HRF512-07N Model Muffle Furnace with 800*800*800mm Chamber and 650°C Rated Temperature for Industrial Ceramic Drying

I. Equipment Overview

•Model: HRF512-07N

•Purpose: Primarily used for heat treatment processes such as drying, curing, and binder removal of semiconductors, electronic components, or materials, especially suitable for processes requiring a nitrogen protective atmosphere.

Detailed Photos

II. Basic Parameters

• Temperature Range: Commonly RT (room temperature) to 650°C; maximum test temperature 700°C (not for long-term use).

• Chamber Size: 800×800×800mm (width × height × depth).

• Temperature Zone & Control: 1 temperature zone, 1 control point, precise regulation.

• Heating Method: Stainless steel heating tubes, paired with 1 centrifugal fan for hot air circulation to improve temperature uniformity.

• Insulation Material: Full fiber material, energy-efficient with excellent insulation.

• Temperature Uniformity: ±5°C (tested at 650°C for 1 hour, empty chamber data).

• Heating Power: Maximum ≤36kW.

• Cooling Method: Natural cooling with the furnace (no forced rapid cooling).

III. Key Usage Conditions

1. Gas Requirements (Nitrogen)

   • Type: High-purity nitrogen (purity ≥99.999%).

   • Pressure: 0.2-0.4MPa.

   • Consumption: Approximately 10m³/h.

2. Water Requirements (if applicable)

   • Water Quality: Clean and non-corrosive; temperature ≤23°C; pressure 0.2-0.4MPa; flow rate ~2-6L/min.

3. Environmental Requirements

   • Temperature: 0-40°C; humidity <80%RH; no corrosive gases or strong airflow disturbances.

   • Ventilation: Must be connected to the user's exhaust system (exhaust capacity >15m³/h).

   • Floor: Level, vibration-free, load-bearing >300kg/m².

4. Power Supply Requirements

   • Power: Three-phase five-wire system (220/380V, 50Hz); capacity >50kVA.

   • Wire Color Standards: Live wires (yellow/green/red), neutral (blue), ground (yellow-green).

   • Installation Space: Dimensions ≥2000×3000×3000mm (width × depth × height), area >6m².

IV. Control System

• Upper Computer: MCGS touchscreen (configuration software interface, user-friendly operation, real-time monitoring).

• Lower Computer: Yamatake C1A/C1M temperature controller + Siemens PLC (stable control, reliable logic).

• Core Advantage: Real-time temperature data collection and precise parameter transmission, ensuring stability and reliability for long-term continuous operation.