|
|
Thông tin chi tiết sản phẩm:
Tiếp xúc
nói chuyện ngay.
|
| Phạm vi của các ứng dụng: | Công nghiệp | Kiểu: | Lò giữ điện |
|---|---|---|---|
| Cách sử dụng: | Sấy gốm | Nhiên liệu: | Điện |
| Bầu không khí: | Nitơ | Kích thước buồng hiệu quả: | 800*800*800mm (W*H*D) |
| Loại cặp nhiệt điện: | loại K | Gói vận chuyển: | Bao bì gỗ |
| Đặc điểm kỹ thuật: | 1500*1930*2000mm (W*H*D) | Thương hiệu: | Chitherm |
| Nguồn gốc: | Trung Quốc | Mã HS: | 8514101000 |
| Khả năng cung cấp: | 50 bộ/năm | Tùy chỉnh: | Có sẵn |
| Chứng nhận: | ISO | Đặt phong cách: | Thẳng đứng |
| Làm nổi bật: | 800*800*800mm Chamber Muffle Furnace,HRF512-07N Model Hot Air Drying Oven,650°C Rated Temperature Nitrogen Debinding Furnace |
||
I. Equipment Overview
•Model: HRF512-07N
•Purpose: Primarily used for heat treatment processes such as drying, curing, and binder removal of semiconductors, electronic components, or materials, especially suitable for processes requiring a nitrogen protective atmosphere.
| Delivery List | |||
| Item | Note | QTY | |
| Basic Compositions | Dryer | 1 PC | |
| Certificates of Inspection | Dryer and major purchased components | 1 Set | |
|
Electric purification furnace |
For exhaust gas treatment |
||
| Technical Documents | Manual instructions, technical documents of major purchased components, etc | 1 Set | |
| Key Parts | Stainless Steel Heater | 1 Set | |
| Temperature Controller | 2 Set | ||
| Touch Screen | 1 Set | ||
| circulating fan | 1 Set | ||
| Spares | SSR | 1 PC | |
| Stainless Steel Heater | 1 Set | ||
| Seal gasket | 2 Set | ||
II. Basic Parameters
• Temperature Range: Commonly RT (room temperature) to 650°C; maximum test temperature 700°C (not for long-term use).
• Chamber Size: 800×800×800mm (width × height × depth).
• Temperature Zone & Control: 1 temperature zone, 1 control point, precise regulation.
• Heating Method: Stainless steel heating tubes, paired with 1 centrifugal fan for hot air circulation to improve temperature uniformity.
• Insulation Material: Full fiber material, energy-efficient with excellent insulation.
• Temperature Uniformity: ±5°C (tested at 650°C for 1 hour, empty chamber data).
• Heating Power: Maximum ≤36kW.
• Cooling Method: Natural cooling with the furnace (no forced rapid cooling).
III. Key Usage Conditions
Gas Requirements (Nitrogen)
• Type: High-purity nitrogen (purity ≥99.999%).
• Pressure: 0.2-0.4MPa.
• Consumption: Approximately 10m³/h.
Water Requirements (if applicable)
• Water Quality: Clean and non-corrosive; temperature ≤23°C; pressure 0.2-0.4MPa; flow rate ~2-6L/min.
Environmental Requirements
• Temperature: 0-40°C; humidity <80%RH; no corrosive gases or strong airflow disturbances.
• Ventilation: Must be connected to the user's exhaust system (exhaust capacity >15m³/h).
• Floor: Level, vibration-free, load-bearing >300kg/m².
Power Supply Requirements
• Power: Three-phase five-wire system (220/380V, 50Hz); capacity >50kVA.
• Wire Color Standards: Live wires (yellow/green/red), neutral (blue), ground (yellow-green).
• Installation Space: Dimensions ≥2000×3000×3000mm (width × depth × height), area >6m².
IV. Control System
• Upper Computer: MCGS touchscreen (configuration software interface, user-friendly operation, real-time monitoring).
• Lower Computer: Yamatake C1A/C1M temperature controller + Siemens PLC (stable control, reliable logic).
• Core Advantage: Real-time temperature data collection and precise parameter transmission, ensuring stability and reliability for long-term continuous operation.
Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.
1.What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
2.What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the most suitable products, along with highly customizable solutions to meet your specific requirements.
3.What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and sales, Chitherm possesses patented technologies and core resources to deliver superior solutions.
Người liên hệ: zang
Tel: 18010872860
Fax: 86-0551-62576378
