|
Thông tin chi tiết sản phẩm:
Tiếp xúc
nói chuyện ngay.
|
| Phạm vi ứng dụng: | Công nghiệp | Loại: | Lò giữ điện |
|---|---|---|---|
| Sử dụng: | Sấy gốm | Bầu không khí: | nitơ |
| Kích thước buồng hiệu quả: | 600*600*600mm (W*H*D) | Cặp nhiệt điện: | Loại K |
| Nhiệt độ tối đa: | 500oC | Kích thước hiệu quả: | 600*600*600 |
| Gói vận chuyển: | bao bì gỗ | Thông số kỹ thuật: | 1350*1750*1950mm (W*H*D) |
| Thương hiệu: | Chitherm | Nguồn gốc: | Trung Quốc |
| Làm nổi bật: | Industrial electric box furnace,High temperature box furnace with warranty,Precision furnace temperature control ±1ºC |
||
Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.
1. Applications:
Mainly used for binder burning out(BBO) process of electronic components, ceramic substrates.
2. Mainly Specifics:
| 3. Delivery List | |||
| Item | Note | QTY | |
| Basic Compositions | Dryer | 1 PC | |
| Certificates of Inspection | Dryer and major purchased components | 1 Set | |
| Technical Documents | Manual instructions, technical documents of major purchased components, etc | 1 Set | |
| Key Parts | Heating Elements | Stainless Steel Heater | 1 Set |
| Thermocouple | WATLOW/THERMOWAY, Type K | 1 PC | |
| Temperature Controller | 1 Set | ||
| Monitor | Touch screen | 1 Set | |
| Spares | SSR | 1 PC | |
4. Facility Requirements
4.1 Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong
airflow disturbance.
4.2 Process air conditions: 99.999% purity nitrogen, pressure 0.2 - 0.4Mpa, gas consumption 10m3 /h.
4.3 Ventilation system: non-contact access to the user pumping system, pumping capacity is greater
than 15m3 /h;
4.4 Ground requirements: level, no obvious vibration, bearing capacity >300Kg/m2 .
4.5 Power conditions: capacity greater than 24kVA, 3 phases 5 lines, voltage 220/380V, frequency
50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green;
4.6 Installation site: 2000mm×3000mm×3000mm (W×H×D), installation area greater than 6m2.
Người liên hệ: zang
Tel: 18010872860
Fax: 86-0551-62576378
