Inert Air Atmosphere Laboratory Heat Treatment Furnace Ceramic Sintering oven

The Bf1500-150 Temperature Bell Furnace Your Solution for Temperature Ceramic Sintering in Air Atmosphere

Overview:
The furnace body adopts a fully enclosed structure, achieving atmosphere sintering in the furnace chamber. It meets the sintering needs of various workpieces, has a wide application market, flexible usage methods and means, and broad development prospects. It is very suitable for small batch production and trial manufacturing in factories and research units.

Performance Parameters

1. Effective furnace chamber size: 1600×1250×800mm (D×H×W)
2. Temperature range: RT~1400ºC
3. Maximum temperature: 1500ºC
4. Number of temperature control points: 6 points
5. Furnace temperature uniformity: ±5ºC (measured in an empty furnace at 1400ºC for 2 hours)
6. Temperature control method: Intelligent temperature controller with PID parameter self-tuning
7. Control method: Phase-shift control
8. Heating elements: Heating elements
9. Control instrument: Dahua Chino KP1000 temperature controller
10. Alarm protection: Over-temperature, deviation, motor overload, phase sequence protection, low air pressure, etc., with audible and visual alarm protection
11. Working power supply: 220/380VAC, 50Hz
12. Atmosphere system: Dry, clean, oil-free compressed air or high-purity oxygen
13. External dimensions: 2240×3280×4684mm (W×D×H), excluding tracks and control cabinet
    

    

Equipment Installation and Usage Conditions

1. The equipment must be installed indoors, with an ambient temperature of 0ºC~40ºC. The indoor environment should be free of flammable gases, corrosive gases, and steam.
2. The equipment requires a floor area of no less than 20 square meters, with a working space length of no less than 5 meters, width of no less than 4 meters, and height of no less than 4 meters. The foundation should be solid and level, with a total furnace weight of approximately 10000kg.
3. The power supply for the furnace must be a three-phase five-wire AC power line, 240kVA, 220/380±10%VAC, 50±2%Hz. This power line should be dedicated, and large power conversion equipment such as welding machines, electric furnaces, and metal cutting machines should not be connected to this distribution.
4. The equipment must be reliably grounded.