|
Product Details:
Contact Now
Chat Now
|
| Model NO.: | HBF80-17NH | Range Of Applications: | Industrial |
|---|---|---|---|
| Type: | Electric Holding Furnace | Usage: | Ceramic Sintering |
| Fuel: | Electric | Effective Chamber Dimensions: | 430*430*500mm(W*H*D) |
| Atmosphere: | Nitrogen/Hydrogen | Thermocouple: | Tungsten-rhenium Thermocouple |
| Rated Temp: | 1600ºC | Max Temp: | 1700ºC |
| Transport Package: | Wooden Package | Specification: | 1600*2050*1830mm (W*H*D) |
| Trademark: | Chitherm | Origin: | China |
| HS Code: | 8514101000 | Production Capacity: | 50 Sets/Year |
| Highlight: | Molybdenum Wire Heating Atmosphere Furnace,Large Chamber HTCC Production Furnace,Energy Saving High Temperature Box Furnace |
||
1.Product Description
HBF80-17NH is a large-volume atmosphere sintering furnace with spacious working chamber ≥430×430×500 mm, supporting large batch loading and stacked sintering for HTCC substrates to boost production capacity. It can run continuously at 1600℃ and withstand short peak temperature up to 1700℃.
The U-shaped spiral molybdenum wire heating system has optimized power configuration: maximum heating power 25–30 kW, while holding power for empty chamber is controlled ≤15 kW, which effectively reduces energy consumption during long soaking cycles in mass production.
It supports humidified nitrogen and hydrogen atmosphere with online oxygen and dew point monitoring to guarantee uniform thermal and atmosphere condition inside the chamber. Programmable controller supports ≥20 recipe steps with PID auto-tuning. Segmented heating rate matches HTCC long-cycle process of slow debinding and high-temperature sintering. Touch screen allows quick recipe recall; exhaust ignition and tar collector cut down maintenance frequency for continuous shift production.
2. Technical Parameters
| Item | Details |
|---|---|
| Equipment Name | HBF80-17NH High Temperature N₂-H₂ Atmosphere Box Furnace |
| Rated Operating Temp | 1600℃ |
| Maximum Temp | 1700℃ |
| Effective Chamber Dimension | ≥430×430×500 mm (Width × Height × Depth) |
| Heater | U-shaped spiral molybdenum wire |
| Atmosphere Mode | Nitrogen / Hydrogen, humidification available |
| Temp Stability | ±1℃, PID auto-tuning |
| Uniformity Performance | ±5℃, tested at 1600℃, 2h holding, empty furnace |
| Thermocouple Type | Tungsten-rhenium |
| Control Point | Single-point control |
| Program Capacity | ≥20 adjustable recipe steps |
| Oxygen Monitoring | Oxygen analyzer for real-time oxygen content detection |
| Dew Point Monitoring | Dew point transmitter for continuous dew point tracking |
| Exhaust System | Single exhaust opening, ignition assembly + tar collector tank |
| Safety Interlock | Sound-light alarm for overheat & thermocouple break, auto cut-off for over-temperature |
| Max Heating Power | 25 to 30 kW |
| Empty Furnace Holding Power | ≤15 kW |
| Heating Ramp | RT~1000℃ ≤5℃/min; 1000~1600℃ ≤2℃/min |
| Cabinet Surface Temp Rise | Below 35℃ |
| Outline Dimension | 1600×2050×1830 mm (W×H×D), final size subject to product |
3.Table 1 Delivery List
| Item | Main Description | Qty |
|---|---|---|
| Basic Assembly | Furnace Main Unit | 1 set |
| Inspection Certificate | Certificates of major outsourced components | 1 set |
| Technical Documents | Operation manual, random technical documents for major outsourced parts, etc. | 1 set |
| Key Components | Molybdenum Wire (customized by Zhire) | 1 set |
| Ignition Device (customized by Zhire) | 1 set | |
| Temperature Controller (Azbil, Japan) | 1 set | |
| Touch Screen, 10-inch | 1 unit | |
| PLC, S7-200 Smart | 1 unit | |
| Vacuum Pump, pumping speed 100 m³/h | 1 set | |
| Vacuum Gauge + Pirani Gauge (Ruibao) | 1 set | |
| Piezoresistive Gauge (Ruibao) | 1 pc | |
| Pressure Reducing Valve (SMC) | 1 set | |
| Pressure Gauge (SMC) | 1 set | |
| Solenoid Valve (SMC) | 1 set | |
| Oxygen Analyzer (Changkai) | 1 unit | |
| Dew Point Transmitter (Vaisala) | 1 pc | |
| Spare Parts | Molybdenum Wire | 1 pc |
4.Operation & Installation Requirements
| Item | Specification |
|---|---|
| Ambient Condition | 0~40℃, RH ≤80%, no corrosive gas, no violent air disturbance |
| Nitrogen Supply | 99.999% purity, pressure 0.2–0.4 MPa, flow 4–12 m³/h |
| Hydrogen Supply | Pressure range 0.2–0.4 MPa, consumption 3–12 m³/h |
| Pneumatic Air | Clean, dry, oil-free compressed air, pressure 0.4–0.8 MPa |
| Cooling Water Supply | 0.1–0.3 MPa, clean non-corrosive water, flow 3–6 L/min |
| Exhaust Connection | Non-contact access to customer exhaust system, exhaust volume >15 m³/h |
| Ground Base | Flat, low vibration, load capacity >500 kg/m² |
| Electrical Supply | ≥35 kVA, 3P5W, 220/380V, 50Hz. L: Yellow/Green/Red; N: Blue; PE: Yellow-green |
| Installation Space Requirement | 2500×3000×2500 mm (W×H×D), occupied area >7 m² |
![]()
![]()
Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.
![]()
![]()
![]()
![]()
![]()
1.What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
2.What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the most suitable products, along with highly customizable solutions to meet your specific requirements.
3.What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and sales, Chitherm possesses patented technologies and core resources to deliver superior solutions.
Contact Person: zang
Tel: 18010872860
Fax: 86-0551-62576378