1100 ordm Max Temp HWF160-10NH Vacuum Atmosphere Tank Furnace for Temperature Sintering in Industrial Applications

This furnace is designed for soldering processes of metal parts and HTCC packages, with additional applications including decarburization, annealing, quenching, scorching, hardening, and thermal decomposition.

• Rated Temperature: 900°C
• Maximum Temperature: 1100°C
• Atmosphere Options: N2, H2 with humidification
• Oxygen Content Measurement: O2 content analyzer
• Muffle Material: SUS 310S
• Muffle Dimensions: φ750mm×900mm(d×D)
• Effective Chamber Dimensions: 500×500×650mm(W×H×D)
• Loading Method: Manual through horizontal guideway shelves
• Heating Method: Resistance wire pre-built heating plate
• Cooling Method: Air cooling with blower
• Temperature Control Stability: ±1°C (controller with P.I.D function)
• Profile Steps: Default 20 steps
• Temperature Uniformity: ±5°C
• Thermocouple: Type K
• Temperature Control Points: 3
• Temperature Measurement Points: 1
• Maximum Heating Power: 40kW
• Typical Insulation Power: ≤25kW
• Heating Speed: ≤5°C/min
• Furnace Surface Temperature: ≤40°C
• Maximum Vacuum Value: ≤10Pa
• Exhaust System: 1 exhaust port on top with H2 igniter
• Alarm System: Audible and visual alarms for over temperature, thermocouple failure, low air/water pressure, and substandard vacuum level
• Weight: 1500kg
• Appearance Color: Light Grey
• External Dimensions: 1650mm×1950mm×2000mm (W×H×D)

• Environmental Conditions: Temperature 0~40°C, humidity ≤80%RH, no corrosive gas, no strong airflow disturbance
• N2 Conditions: 99.999% purity, working pressure: 0.2-0.4MPa, Max gas consumption 2-6 m³/h
• H2 Conditions: Working pressure: 0.2-0.4MPa, Max gas consumption 1-3m³/h
• Compressed Air Condition: Dry, clean, oil-free, working pressure: 0.4-0.8MPa
• Water Conditions: Clean, no corrosive water, working pressure 0.1-0.3MPa, 3-9L/min
• Ventilation System: Non-contact access to user pumping system, pumping capacity >15m³/h
• Ground Requirements: Horizontal, no obvious vibration, load-bearing >500 kg/m²
• Power Condition: Capacity >55kVA, 3-phases 5-lines, voltage 220/380V, frequency 50Hz
• Installation Site: 3000mm×2500mm×3000mm(D×W×H), installation area >7.5m²

Hefei Chitherm Equipment Co., Ltd. specializes in the research, development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Our product range includes bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces.

These products are widely used in advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. They are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.